LIGHTWAVE UPS BATTERY PRICES 12v 7ah

Keep your essential electronic equipment powered during electricity interruptions with the LIGHTWAVE UPS BATTERY 12V 7.5AH (LW 7AH). This rechargeable battery is designed to deliver dependable backup power for compatible Uninterruptible Power Supply (UPS) systems, CCTV installations, alarm systems, routers and other standby power applications.

Featuring a nominal voltage of 12V DC and a capacity of 7.5Ah, the Lightwave battery provides stored electrical energy for compatible backup systems. Its Sealed Maintenance-Free (SMF) construction uses Valve Regulated Lead Acid (VRLA) technology with an Absorbent Glass Mat (AGM) design. This sealed construction helps prevent electrolyte leakage under normal operating conditions and eliminates the need for regular water refilling.

Whether you need a replacement battery for an existing UPS or a dependable backup power component for your security installation, the Lightwave LW 7AH offers a compact and practical solution.

Key Features and Benefits

• 12V DC Nominal Voltage: Designed for compatible 12V backup power systems.
• 7.5Ah Battery Capacity: Provides stored energy for UPS and standby applications, based on the listed 20-hour capacity rating.
• Sealed Maintenance-Free Design: No routine electrolyte topping-up is required.
• VRLA AGM Technology: Uses valve-regulated lead-acid technology with an absorbent glass mat separator.
• Rechargeable Battery: Can be recharged using a compatible UPS or battery charger.
• Compact Construction: Measures approximately 151 × 65 × 94mm, making it suitable for many standard UPS battery compartments.
• Faston Terminal Connections: Available with F1 or F2 terminal configurations, depending on the supplied version.
• Low Self-Discharge: Designed to retain stored charge during standby periods.
• Leak-Resistant Construction: Sealed casing helps minimise leakage during normal use and installation.
• Wide Application Range: Suitable for compatible UPS systems, CCTV, alarms, emergency lighting and networking equipment.

Sealed Maintenance-Free VRLA Technology

The Lightwave LW 7AH uses Sealed Maintenance-Free (SMF) Valve Regulated Lead Acid technology. Unlike conventional flooded batteries, this battery has a sealed construction that does not require users to add distilled water during normal operation.

Its AGM construction holds the electrolyte within an absorbent glass mat separator. This design supports reliable operation in standby applications where a battery remains connected to a compatible charging system and supplies power when the mains electricity fails.

The sealed design also makes it convenient for use in office environments, computer rooms and security installations where regular battery maintenance would be inconvenient.

Dependable Backup for UPS Systems

A UPS battery is an important component of an uninterrupted power supply system. When electricity goes off, the UPS uses stored battery energy to keep connected equipment operating for a limited period.

The Lightwave 12V 7.5Ah battery is suitable as a replacement for UPS units that require a compatible 12V battery with matching capacity, dimensions and terminal connections.

It can help support:

• Desktop computers and monitors connected to compatible UPS units.
• Routers and networking equipment.
• CCTV cameras and security recording systems.
• Alarm panels and security installations.
• Emergency lighting systems.
• Other compatible low-voltage standby power equipment.

Actual backup duration depends on the connected equipment’s power consumption, UPS efficiency, battery condition and operating environment.

Compact Design and Easy Installation

With approximate dimensions of 151mm × 65mm × 94mm, the Lightwave LW 7AH is designed to fit many standard UPS battery compartments.

Its compact rectangular housing makes installation convenient when replacing an existing battery of the same specification. The battery is commonly listed with Faston tab terminals, available in F1 or F2 configurations depending on the version.

Before purchasing, compare the terminal size and polarity with your existing battery. Also check the battery compartment dimensions and confirm that your UPS supports the required 12V battery configuration.

Charging and Battery Care

For reliable performance, use a charger or UPS charging circuit designed for a 12V VRLA AGM battery.

Commonly listed charging parameters at approximately 25°C include:

• Standby/Float Charging Voltage: 13.5V–13.8V DC.
• Cycle Charging Voltage: 14.4V–15.0V DC.
• Recommended Maximum Charging Current: Approximately 2.25A–2.7A, depending on the battery version.

Avoid overcharging, deep discharging and exposure to excessive heat. Store the battery in a cool, dry and well-ventilated area. Always observe the polarity markings when connecting the terminals.

Ideal Applications

The LIGHTWAVE 12V 7.5AH UPS Battery is suitable for:

• Home and office UPS systems.
• Computer backup power.
• CCTV and surveillance installations.
• Security and alarm systems.
• Emergency lighting.
• Networking and communication equipment.
• Compatible solar and standby backup systems.

Detailed Product Specifications

• Brand: LIGHTWAVE
• Product Name: UPS Battery
• Model: LW 7AH
• Nominal Voltage: 12V DC
• Rated Capacity: 7.5Ah
• Capacity Rating: 20-hour discharge rate, as listed
• Battery Chemistry: Sealed Lead Acid (SLA)
• Battery Technology: VRLA / AGM
• Construction: Sealed Maintenance-Free (SMF)
• Terminal Type: F1 or F2 Faston tabs, depending on version
• F1 Terminal Width: Approximately 4.75mm
• F2 Terminal Width: Approximately 6.35mm
• Dimensions (L × W × H): Approximately 151 × 65 × 94mm
• Total Height Including Terminals: Approximately 100mm
• Weight: Approximately 2.25–2.4kg
• Float Charging Voltage: 13.5V–13.8V at 25°C
• Cycle Charging Voltage: 14.4V–15.0V at 25°C
• Maximum Charging Current: Approximately 2.25A–2.7A, subject to version
• Operating Temperature: Approximately -15°C to +50°C, depending on operating mode and manufacturer guidance
• Typical Standby Design Life: Approximately 3–5 years under suitable conditions; actual service life varies with temperature, charging and usage.
• Primary Application: UPS and standby backup power.

Specifications are based on available LW 7AH retailer listings. Confirm the exact terminal configuration, charging limits and rating on the supplied battery before installation.

Why Choose the LIGHTWAVE 12V 7.5AH UPS Battery?

The LIGHTWAVE LW 7AH offers a practical combination of compact construction, rechargeable performance and maintenance-free operation. Its 12V 7.5Ah rating makes it a useful replacement option for compatible UPS systems and other standby applications.

Choose the Lightwave UPS battery for dependable stored power when your essential electronics need backup support.