-12%
Access Points, Ubiquiti
Ubiquiti airMAX PowerBeam 5AC Gen2
Specifications
- Power Supply: 24V, 0.5A Gigabit PoE Adapter
- Power Consumption: 8.5W
- Power Method: Passive PoE
- Supported Voltage Range: 20 to 26VDC
- Networking Interface: 10/100/1000 Ethernet Port
- Processor Specs: MIPS 74Kc
- Memory: 64MB
- LEDs: Power, Ethernet, (4) Signal Strength
- Mounting: Pole-Mounting Kit (included)
- Wind Loading: 380N @ 200km/h
- Wind Survivability: 200km/h (125mph)
- Operating Temperature: -40 to 70°C (-40 to 158°F)
- RoHS Compliance: Yes
- Vibration Test: IEC 68-2-6
- Temperature Shock Test: IEC 68-2-14
- UV Test: IEC 68-2-5 at 40°C (104°F), Equivalent: ETS 300 019-1-4
- Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
- Certifications: CE, FCC, IC
- Dimensions: 420 x 420 x 230mm
- Weight: 2.22kg
KSh 19,000.00 KSh 21,500.00
The Ubiquiti airMAX PowerBeam 5AC Gen2 is a powerful outdoor wireless solution engineered for long-distance point-to-point (PtP) and point-to-multipoint (PtMP) connectivity. Designed with advanced airMAX ac technology, this device delivers high throughput, exceptional signal stability, and superior noise immunity, making it ideal for ISPs, enterprise networks, and remote connectivity deployments.
With its integrated dish reflector and 25 dBi high-gain antenna, the PowerBeam ensures focused signal transmission, minimizing interference and maximizing performance even in RF-congested environments. It supports data speeds exceeding 450 Mbps, enabling reliable high-bandwidth applications such as video surveillance, VoIP, and data backhaul.
Key Features & Highlights
High-Speed Performance
- Up to 450+ Mbps throughput for fast data transmission
- Operates on the 5 GHz frequency band for reduced interference
- Supports airMAX ac protocol for improved efficiency and latency
Long-Range Connectivity
- Designed for long-distance links (15+ km depending on environment)
- Ideal for building-to-building bridging and rural internet deployment
- Excellent beam directivity ensures strong, focused signal delivery
Advanced RF & Noise Immunity
- Narrow beamwidth filters out unwanted RF interference
- Built-in airView spectrum analyzer for real-time RF monitoring
- Enhanced signal-to-noise ratio (SNR) for stable connections
Dedicated Management WiFi
- Includes a separate WiFi radio for easy setup and management
- Compatible with mobile apps for quick configuration
- Simplifies installation without needing wired access
Hardware & Design
- Integrated InnerFeed technology eliminates cable losses for better performance
- 25 dBi antenna gain for extended range and signal strength
- Gigabit Ethernet port with PoE support for efficient connectivity
- Adjustable mounting system with ±20° alignment flexibility
- Built-in surge protection for outdoor durability
Software & Network Capabilities
- Powered by airOS 8, offering a modern and intuitive interface
- Supports:
- PtP (Point-to-Point) mode
- PtMP (Point-to-Multipoint) mode
- Features:
- Automatic channel selection
- Adjustable channel widths (10–80 MHz)
- WPA2 security encryption
- Real-time RF analytics and diagnostics
Ideal Use Cases
- Wireless ISP (WISP) deployments
- CCTV and surveillance backhaul
- Enterprise campus connectivity
- Rural and remote internet distribution
- Building-to-building network extension
Why Choose Ubiquiti airMAX PowerBeam 5AC Gen2?
- Cost-effective long-range wireless bridge solution
- Strong interference resistance in crowded networks
- Easy installation with mobile-friendly management tools
- Reliable performance for mission-critical connectivity
Based on 0 reviews
Be the first to review “Ubiquiti airMAX PowerBeam 5AC Gen2”
Related products
-
Access Points, TP-Links
TP-Link AC1200 Wireless Access Point
Specifications
- Interface: 1 x Gigabit Ethernet (RJ-45) Port (supports 802.3af/at PoE and Passive PoE)
- Power Supply: 802.3af/at PoE or 24V Passive PoE (PoE adapter included)
- Power Consumption: 10.5W
- Antenna: 2.4 GHz: 2× 3 dBi, 5 GHz: 2× 4 dBi (detachable antennas)
- Weatherproof Enclosure: IP65 rated
- Mounting: Pole/Wall mounting kits included
- Concurrent Clients: Supports 220+ clients
- Wireless Standards: IEEE 802.11a/b/g/n/ac
- Frequency: 2.4 GHz, 5 GHz
- Signal Rate: Up to 867 Mbps on 5 GHz, up to 300 Mbps on 2.4 GHz
- Wireless Functions: MU-MIMO, Beamforming, Band Steering, Airtime Fairness, Load Balance, Seamless Roaming, Omada Mesh
- Wireless Security: Captive Portal Authentication, Access Control, MAC Address Filtering, SSID to VLAN Mapping
- Centralized Management: Omada Cloud-Based Controller, Omada Hardware Controllers (OC200/OC300), Omada Software Controller
- Cloud Access: Yes, with Omada Controllers
- App Management: Omada App for convenient control
- Protocols: IPv4, IPv6
- SNMP: v1, v2c
- Operating Temperature: -30–70 ℃ (-22–158 ℉)
- Storage Temperature: -40–70 ℃ (-40–158 ℉)
- Operating Humidity: 10–90% RH non-condensing
- Certifications: CE, FCC, RoHS
- Dimensions: 1.8 × 1.1 × 8.5 in (46 × 26.7 × 214.9 mm)
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi AP WIFI 6 Mesh Access Point
- Management interfaces: Ethernet, Bluetooth
- Networking interface: (1) GbE RJ45 port
- Button: Factory reset
- Power method: 802.3af PoE
- Power supply: UniFi PoE switch, 48V, 0.32A PoE adapter (included)
- Supported voltage range: 44 to 57VDC
- Max. power consumption: 11.4W
- Mounting: Wall, desktop, pole mount(included), Ceiling mount (optional)
- Operating temperature: -30 to 60° C (-22 to 140° F)
- Operating humidity: 5 – 95% noncondensing
- Dimensions: Ø48.5 x 159.5 mm (Ø1.9 x 6.28″)
- Weight: 400 g (0.88 lb)
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi AP AC Lite Indoor Access Point
Specifications
- Networking Interface: 10/100/1000 Ethernet Ports
- Antennas: Dual-Band Antennas, 3 dBi Each
- Max TX Power: 2.4GHz: 20 dBm – 5GHz: 20 dBm
- Wi-Fi Standards: 802.11 a/b/g/n/ac
- Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return)
- Power Supply: 24V, 0.5A Gigabit PoE Adapter
- Maximum Power Consumption: 6.5W
- BSSID : Up to Four Per Radio
- Power Save: Supported
- Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- Certifications: CE, FCC, IC
- Mounting: Wall and Ceiling
- Compatibility: 24v / 48v compatible
- Dimensions: 160 x 160 x 31.45 mm (6.30 x 6.30 x 1.24″)
- Weight: 170 g With Mounting Kits 185 g (6.5 oz)
SKU: n/a -
Access Points, TP-Links
TP-Link 300Mbps Wireless N Wall-Plate Access Point
- Wireless Standards: IEEE 802.11n/g/b
- Frequency: 2.4GHz
- Signal Rate: Up to 300Mbps
- Transmit Power: Up to 20dBm
- Interface: 1 x 10/100Mbps Ethernet Port (RJ45)
- Button: Reset
- Power Supply: 802.3af PoE or 48V Passive PoE (PoE Adapter Included)
- Power Consumption: 4.3W
- Antenna Type: Internal Omni
- Mounting: Wall Plate Mounting
- Dimensions : 3.2 × 1.8 × 4.8 in (82.6 × 45.2 × 121.9 mm)
SKU: n/a -
Access Points, TP-Links
TP-Link 300Mbps Wireless N Ceiling Mount Access Point
Specifications
- Wireless Standards: IEEE 802.11n/g/b (2.4 GHz)
- Speed: Up to 300 Mbps (2.4 GHz only)
- Ethernet Port: 1 × 10/100 Mbps RJ45 (Passive PoE supported)
- Antennas: 2 × internal omnidirectional antennas
- Mounting Options: Ceiling or wall mount
- Security: WPA/WPA2/WPA3-Personal & Enterprise, 802.1X authentication, SSID-to-VLAN mapping
- Guest Network: Yes, with Captive Portal support
- Management: Omada SDN, Controller, Web UI, CLI
- Power Supply: Passive PoE
- Power Consumption: Max 4.3 W
- Operating Temperature: 0 °C ~ 40 °C
- Dimensions: 180 × 180 × 47.5 mm
SKU: n/a
There are no reviews yet.