Shop
Showing 661–675 of 735 results
-
Access Points, Ubiquiti
Ubiquiti NanoStation Loco M5 MIMO Wireless Base Station
specification
- Power Supply (PoE): 24V, 0.5A
- Max. Power Consumption: 5.5 W
- Gain: 13 dBi
- Polarisation: Dual Linear
- Enclosure Characteristics: Outdoor UV Stabilised Plastic
- Mounting: Pole Mounting Kit Included
- Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
- Operating Temperature: -30 to 75° C
- Operating Humidity: 5 to 95% Condensing
- Shock and Vibration: ETSI300-019-1.4
- Dimensions (mm): 163 x 31 x 80
- Weight: 0.18 kg
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti NanoStation locoM2 2.4GHz airMAX 8dBi CPE
Specifications
- Â Power method: Passive PoE
- Frequency range: 2.3–2.5 GHz
- Ethernet Interface: 1 × 10/100 BASE-TX
- Processor: Atheros MIPS 24KC, 400 MHz
- Max power consumption: 5.5WÂ
- Operating frequency: 2412–2462 MHz
- Cross-pol Isolation: 20 dB Minimum
- Beam width: 60° (H-pol) / 60° (V-pol) / 60°
- Power supply: 24V, 0.5A
- Mounting: Pole-Mount (Kit Included)
- Dimensions: 163 × 31 × 80 mm
- Weight: 180 g
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti NanoStation M5 MIMO Wireless Bridge
Specifications
- Processor Specs:Â Atheros MIPS 24KC, 400MHz
- Memory Information:Â 32MB SDRAM, 8MB Flash
- Operating Frequency: 5470 – 5825 MHz
- Antenna Gain: 14.6 – 16.1 dBi
- Power Supply:Â 24V, 0.5A POE
- Power Consumption:Â 8 Watts
- Physical Characteristics:Â Outdoor UV Stabilized Plastic with pole straps included for mounting
- Regulatory & Compliance:Â FCC Part 15.247, IC RS210, CE
- Shock and Vibration: ETSI300-019-1.4
- Dimensions: 294 x 31 x 80 mm
- Â Weight: 0.4 kg
SKU: n/a -
Routers, Ubiquiti
Ubiquiti Networks UniFi PoE+ Adapter
specification
- Output Voltage:Â 48V DC @ 0.65A
-
Rated Voltage: 100–240V AC at 50/60Hz
-
Input Current:Â 0.75A Max.
-
Power Output:Â Up to 30W PoE+
-
Efficiency:Â 87%
-
Switching Frequency:Â 70 kHz Max.
- Dimensions:Â 93 x 62 x 35 mm
-
Weight:Â 156 g
SKU: n/a -
Ubiquiti, Wireless
Ubiquiti PowerBeam M5 400
specification
- Enclosure material: UV-stabilized plastic
- Mounting: Pole mount kit (included)
- Wind survivability: 200 km/h
- Wind loading: 342.5 N @ 200 km/h
- Networking interface:Â GbE RJ45 port
- Power method: Passive PoE 2-pair
- Power supply: 24V, 0.5A gigabit PoE adapter
- Supported voltage range: 20–27V DC
- Max. power consumption: 8W
- Max. TX power: 26 dBm
- Gain: 25 dBi
- ESD/EMP protection: Air/contact ±24 kV
- LEDs: Power, LAN, WLAN
- Signal strength LEDs: Software-adjustable (custom RSSI levels)
- RoHS compliance: Yes
- Dimensions: 420 × 420 × 275 mm
- Weight: 1.8 kg
SKU: n/a -
Switches & PoE Injectors, Ubiquiti
Ubiquiti UniFi 24 Port PoE Pro Switch
specification
- Switching Capacity: 88 Gbps
- Forwarding Rate: 65.472 Mpps
- Power Supply:Â AC/DC, Internal, 36W
- Voltage Range: 100 to 240VAC
- Max Power Consumption: 30W
- ESD/EMP Protection: Air: ± 16 kV, Contact: ± 12 kV
- Shock and Vibration:Â ETSI300-019-1.4 Standard
- Operating Temperature: -5 to 45° C (23 to 113° F)
- Operating Humidity:Â 10 to 90% Noncondensing
- Certifications:Â CE, FCC, IC
- Dimensions: 442.4 x 285.4 x 43.7 mm (17.42 x 11.24 x 1.72″)
- Weight: 3.50 kg (7.72 lb)
- Weight with brackets: 3.59 kg (7.92 lb)
SKU: n/a -
Switches & PoE Injectors, Ubiquiti
Ubiquiti UniFi 48 Port Full PoE Pro Switch 600W
- Total Number of Ports: 48
- Gigabit RJ45 Ports: 48
- Power Consumption: 750W
- Supported Voltage Range: 100-240VAC, 50/60 Hz
- 10G SFP+ Ports: 4
- PoE Budget: 600W
- PoE Standards: 802.3bt PoE++ (8 ports) and 802.3at PoE+ (40 ports)
- Operating Temperature: -5 to 40°C (23 to 104°F)
- Rack mountable: Yes (1U)
- Dimensions: 442.4 x 285.4 x 43.7 mm
- Weight: 6.8 kg
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi 6 Access Point Wi-Fi 6 Pro
specification
- Enclosure material: Plastic
- Mounting material: SGCC steel
- weatherproofing: IP54
- Networking interface: (1) GbE RJ45 port
- Button: Factory reset
- LED*: White/blue
- Power method: 802.3at PoE+
- Power supply: UniFi PoE switch, 48V, 0.5A PoE adapter (not included)
- Supported voltage range: 44 to 57VDC
- Max. power consumption: 13W
- Max. TX power: 2.4 GHz, 22 dBm / 5 GHz, 26 dBm
- MIMO: 2.4 GHz, 2 x 2 (UL MU-MIMO) / 5 GHz, 4 x 4 (DL/UL MU-MIMO)
- Throughput rate: 2.4 GHz, 573.5 Mbps / 5 GHz, 4.8 Gbps
- Antenna gain: 2.4 GHz, 4 dBi / 5 GHz, 6 dBi
- Mounting: Wall/ceiling (included)
- Operating temperature: -30 to 60° C (-22 to 140° F)
- Operating humidity: 5 – 95% noncondensing
- Dimensions: Ø197 x 35 mm (Ø7.76 x 1.38″)
- Weight Without mount: 460 g (1.01 lb)
- With mount: 600 g (1.32 lb)
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi 6 In-wall Access Point
specification
- Networking Interface: (3) 10/100/1000 Ethernet Ports
- Buttons: Reset
- Power Method:Â 802.3at PoE+ Supported
- Power Supply:Â UniFi PoE Switch (Not Included)
- Power Save: Supported
- PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
- Maximum Power Consumption: 7W
- Maximum Power Consumption with PoE Passthrough: 19W
- Antennas:(1) Dual-Band Antenna, Single-Polarity,–2.4 GHz: 1 dBi,– 5 GHz: 2 dBi
- WiFi Standards: 802.11 a/b/g/n/r/k/v/ac
- Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- BSSID:Â Up to 8 per Radio
- Mounting:Â 1-Gang Electrical Wall Box (Not Included)
- Operating Temperature: -10 to 50° C (14 to 122° F)
- Operating Humidity: 5 to 95% Noncondensing
- Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01″)
- Weight: 200 g (6.43 oz)
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi AP AC Lite Indoor Access Point
Specifications
- Networking Interface: 10/100/1000 Ethernet Ports
- Antennas: Dual-Band Antennas, 3 dBi Each
- Max TX Power: 2.4GHz: 20 dBm – 5GHz: 20 dBm
- Wi-Fi Standards: 802.11 a/b/g/n/ac
- Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return)
- Power Supply: 24V, 0.5A Gigabit PoE Adapter
- Maximum Power Consumption: 6.5W
- BSSID : Up to Four Per Radio
- Power Save: Supported
- Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- Certifications: CE, FCC, IC
- Mounting: Wall and Ceiling
- Compatibility: 24v / 48v compatible
- Dimensions: 160 x 160 x 31.45 mm (6.30 x 6.30 x 1.24″)
- Weight: 170 g With Mounting Kits 185 g (6.5 oz)
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi AP AC Mesh Access Point
specification
- Networking Interface: (1) 10/100/1000 Ethernet Port
- Maximum Power Consumption: 8.5 W
- Power Method: 802.3af PoE or 24V Passive PoE
- Antennas: (2) External Dual-Band Omni
- Gain: 3 dBi (2.4GHz), 4 dBi (5GHz)
- Operating Temperature: -30°C to 70°C
- Operating Humidity: 5% to 95% Noncondensing
- Certifications: CE, FCC, IC
- Wireless Standards: 802.11 a/b/g/n/ac, 2×2 MIMO
- Dimensions: 353 x 46 x 34.4 mm
- Weight: 152 g (5.36 oz)
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi AP AC Pro Indoor/Outdoor Access Point
- Wi-Fi Standards:Â 802.11 a/b/g/n/ac
- Throughput (5 GHz):Â 1300 Mbps
- Throughput (2.4 GHz):Â 450 Mbps
- MIMO:Â 3×3
- Ports:Â 2x 10/100/1000 Ethernet Ports
- PoE Mode:Â Passive PoE (48V) and 802.3af/at PoE+
- Mounting:Â Wall/Ceiling kits included
- Dimension:196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38″)
- Weight:350 g (12.4 oz) weight
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi AP WIFI 6 Mesh Access Point
- Management interfaces: Ethernet, Bluetooth
- Networking interface: (1) GbE RJ45 port
- Button: Factory reset
- Power method: 802.3af PoE
- Power supply: UniFi PoE switch, 48V, 0.32A PoE adapter (included)
- Supported voltage range: 44 to 57VDC
- Max. power consumption: 11.4W
- Mounting: Wall, desktop, pole mount(included), Ceiling mount (optional)
- Operating temperature: -30 to 60° C (-22 to 140° F)
- Operating humidity: 5 – 95% noncondensing
- Dimensions: Ø48.5 x 159.5 mm (Ø1.9 x 6.28″)
- Weight: 400 g (0.88 lb)
SKU: n/a -
Switches & PoE Injectors, Ubiquiti
Ubiquiti UniFi Dream Machine Pro Gateway & 8Port Switch
specification
- Enclosure materials: Aluminium CNC, SGCC steel
- Mount material: SGCC steel
- Processor: Quad-core ARM® Cortex®-A57 at 1.7 GHz
- System memory: 4 GB DDR4
- On-board storage: 16 GB eMMC
- Management interface: Ethernet, Bluetooth
- Networking interface:Â LAN: GbE RJ45 ports /Â WAN: GbE RJ45 port
- SFP+ interface:Â LAN: 10G SFP+ /Â WAN: 10G SFP+
- IDS/IPS throughput: 3.5 Gbps, measured with iPerf3.
- Power method: Universal AC Input, 100—240V AC, 50/60 Hz / USP-RPS DC input
- Power supply: AC/DC, internal, 50W
- Supported voltage range: 100—240V AC
- Max. power consumption: 33W
- ESD/EMP protection: Air: ± 15kV, contact: ± 8kV
- LCM display: (1) 1.3″ touchscreen
- Button: Factory reset
- Operating temperature: -10° to 40° C
- Operating humidity: 5 to 95% noncondensing
- Certifications: CE, FCC, IC
- Dimensions: 442.4 x 43.7 x 285.6 mm
- Weight: 3.9 kg
SKU: n/a
Samsung 4GB DDR4 3200MHz PC4 Laptop RAM
DELL 3600 XEON 16GB RAM 500GB Workstation with 8GB GPU
HP Probook 440 G9 14'' DOS Core i7 12th Gen 16GB 512GB SSD Laptop
Dell P2725HE 27 Inch FHD Monitor 













