APC
Showing all 8 results
-
Power Supply, UPS & UPS Batteries
1KVA Smart UPS Tower
Specifications
- Power Capacity: 1000VA / 600W
- Nominal Voltage: 230V
- Output Waveform: Pure sine wave
- Topology: Line-interactive or On-Line
- Typical Recharge Time: \(\sim 3\) hours to 90% capacity
- Battery Type: Maintenance-free sealed lead-acid (VRLA)
- Dimensions: 21.9 cm x 17.1 cm x 43.9 cm
- Weight: 20 kg
SKU: n/a -
Power Supply, UPS & UPS Batteries
APC BX1400UI UPS 1400VA 230V AVR IEC Sockets
Specifications
- Capacity: 1400VA / 700W, suitable for medium to high-performance desktops, routers, and home office equipment
- Voltage Regulation (AVR): Automatic Voltage Regulation stabilizes incoming voltage without draining the battery, ensuring your devices receive safe and steady power
- IEC Output Sockets: Comes with 4 IEC 320 C13 outlets, allowing you to connect multiple devices securely
- Input Voltage: Designed for 230V mains power
- Battery Backup: Provides sufficient runtime to safely shut down devices or continue working during short outages
- LED Indicators: Clear front-panel indicators show battery and power status at a glance
- Audible Alarms: Alerts you to changes in power conditions for quick action
- Surge Protection: Safeguards sensitive electronics from power surges and spikes
SKU: n/a -
Power Supply, UPS & UPS Batteries
APC Easy UPS 1kVA 230V 6x IEC C13 outlets AVR
Specifications
- Product type: Uninterruptible power supply (UPS)
- Battery type: Lead-acid battery types
- Cable length: 1.50 m
- Frequency: 50/60 Hz +/- 5 Hz auto-sensing network frequency
- Voltage: 170…280 V Input voltage limits
- Line interactive: with unsynchronized output frequency of 50/60 Hz +/- 1 Hz
- 6 ms typical: 10 ms maximum transfer time
- Alarm when on battery: distinctive low battery alarm : overload continuous tone alarm
- Energy: 156 J surge energy rate, 1000VA maximum configurable power in VA
- Dimensions: 23.7* 37.3* 14.3 cm dimensions, 6kg weight
SKU: n/a -
Power Supply, UPS & UPS Batteries
APC Smart-UPS 1000VA Tower LCD 230V with Smart Connect Port
Specifications
- SmartConnect Port: Cloud-based remote monitoring & alerts
- LCD Interface: Real-time UPS status and navigation control
- Energy Meter: Tracks power consumption (kWh usage)
- Predictive Battery Replacement: Maintenance planning alerts
- Output Ports: 8 × IEC 320 C13 (battery backup)
- Additional Outputs: 2 × IEC jumper cables
- Input Connection: IEC 320 C14
- Switched Outlet Group: Supports reboot, sequencing, and load sheddingIntelligent Card Slot: Expandable UPS functionality
- Output Power Capacity: 700 Watts / 1.0 kVA
- Max Configurable Power: 700W / 1.0 kVA
- Nominal Output Voltage: 230V
- Nominal Input Voltage: 230V
- Input Voltage Range: 151 – 302V adjustable (160 – 286V standard)
- Waveform Type: Pure sine wave
- Output Voltage Distortion: < 5%
- Frequency: 50/60 Hz ± 3 Hz (sync to mains)
- Transfer Time: 6 ms typical (10 ms max)
- Weight:37.6* 59.5* 32.8 cm, 19.5 kg
SKU: n/a -
Power Supply, UPS & UPS Batteries
APC Smart-UPS C 2000VA-2U Rack Mountable 230V
Specifications
- Power Capacity: 2000 VA / 1300 Watts.
- Rack Height: 2U (standard rackmount).
- Output Voltage: 230V (configurable to 220V or 240V).
- Waveform: Pure Sine Wave on battery.
- Efficiency: Includes a “Green Mode” that bypasses unused components to achieve over 97% efficiency.
- Connections :Input: (1) IEC 320 C20., h ,Output: (6) IEC 320 C13 and (2) IEC Jumpers
- Battery Type: Maintenance-free sealed lead-acid (VRLA).
- Replacement Part: The compatible replacement battery cartridge is the APCRBC133 (or APCRBC148 depending on regional variants—check your specific unit label).
- Hot-Swappable: Batteries can be replaced without powering down connected equipment.
- Recharge Time: Typically 3 hours to full capacity.
- AVR (Automatic Voltage Regulation): Automatically corrects high and low voltage conditions without using battery power.
- LCD Interface: A multifunction console that displays real-time status, load/battery bar graphs, and estimated runtime.
- Management Ports: Features USB and Serial (RJ-45) ports for remote monitoring via PowerChute Business Edition.
- Transfer Time: Typical transfer time is 8ms (10ms maximum
- Dimension:8.9* 48* 47 cm
- Weight:26.2 kg
SKU: n/a -
Power Supply, UPS & UPS Batteries
APC Smart-UPS C Line Interactive 1500VA Rackmount 2U 230V
Specifications
- Capacity: 1500VA / 900W
- Topology: Line Interactive
- Waveform: Pure Sine Wave (on battery)
- Output Voltage: 230V (configurable to 220V / 240V)
- Frequency: 50/60 Hz auto-sensing (±3 Hz)
- Transfer Time: 8 ms typical (2 ms maximum)
- High Efficiency Mode: Green mode for reduced energy consumption
- Online Efficiency: Optimized for continuous performance
- Harmonic Distortion: Less than 5% at full load
- Surge Energy Rating: 459 Joules
- Noise Filtering: Full-time multi-pole noise filtering
- Battery Type: Sealed Lead-Acid
- Backup Output: Pure sine wave for sensitive equipment
- Display: Multifunction LCD status and control panel
- Monitoring Features: Real-time system status, Load and battery levels, Input/output voltage readings
- Output Connections: IEC C13 outlets, Battery backup + surge protection
- Form Factor: Rackmount (2U)
- Dimensions : 25.1 × 59.4 × 60.3 cm
- Weight: 31.91 kg
SKU: n/a -
Power Supply, UPS & UPS Batteries
APC Smart-UPS On-Line 6kVA Rackmount 4U Network Card+ SmartSlot Extended runtime
-5%
Power Supply, UPS & UPS BatteriesAPC Smart-UPS On-Line 6kVA Rackmount 4U Network Card+ SmartSlot Extended runtime
Specifications
- Power Capacity: 6000 VA / 6000 W (Unity Power Factor)
- Form Factor: 4U Rackmount (includes rail kit)
- Voltage: 230V Nominal (Input/Output)
- Connections:
- Efficiency: Up to 98% in “Green Mode”
- Embedded Network Card: Provides a 10/100 Base-T connection for remote web-based monitoring.
- SmartSlot: One available slot to add accessory cards like a Dry Contact I/O card.
- Software: Compatible with PowerChute Network Shutdown for graceful server shutdowns.
- Dimensions:6.85* 17.01* 28.32 Inches
- Weight:132.3 lb(US) (60 kg)
SKU: n/a -
Uncategorized
APC SMC2000I Smart-UPS C 2000VA LCD 230V UPS
Specifications
- Surge Protection: 300 Joules multi-layer protection
- Noise Filtering: Full-time EMI/RFI suppression
- Green Mode: Energy-saving high-efficiency operation
- Display: LCD interface (real-time UPS status)
- Ports: USB & RS-232 connectivity
- Software: PowerChute® Business Edition
- SmartSlot: Supports optional network management card
- Battery Type: Maintenance-free sealed lead-acid battery
- Recharge Time: Approx. 3 hours (typical)
- Battery Life: 3–5 years
- User-Replaceable Batteries: Yes (hot-swappable design)
- Battery Alerts: Low battery, disconnect, and replacement notificationsAudible Alarms: Battery mode, overload, fault alertsAVR (Voltage Regulation): Stabilizes fluctuating power without battery use
- Capacity: 2000VA / 1300W
- Topology: Line-Interactive with AVR (Automatic Voltage Regulation)
- Output Type: Pure sine wave (ideal for sensitive IT equipment)
- Input Voltage: 230V nominal (supports 220V–240V systems)
- Input Frequency: 50/60 Hz auto-sensing
- Output Voltage: 230V (configurable 220V / 240V)
- Weight:25* 59* 60 cm, 30.16kg
SKU: n/a
