Search results: “Ubiquiti”
Showing all 3 results
-
Access Points, Ubiquiti
Ubiquiti airMAX LiteBeam Gen 2 5AC 5GHz 23dBi CPE
Specifications
- Operating frequency (main radio): 5,150 – 5,875 MHz (region dependent)
- Dedicated management radio (Wi-Fi): 2,412 – 2,472 MHz (or in some regions)
- Transmit power (max): ~ 25 dBm (±2 dB tolerance)
- Antenna gain: 23 dBi (directional reflector)
- Channel widths supported: PtP Mode: 10 / 20 / 30 / 40 / 50 / 60 / 80 MHz, PtMP Mode: 10 / 20 / 30 / 40 MHz
- Throughput (typical): over 450 Mbps (subject to link conditions)
- Modulation / Sensitivity: supports a variety of modulation schemes (e.g. BPSK, QPSK, QAM) with corresponding receive sensitivity down to around –96 dBm in favorable conditions
- Operating System: airOS Version 8, used across Ubiquiti’s airMAX ac product line
- Wireless Modes Supported: PtP (Point-to-Point), PtMP (Point-to-Multipoint), Mixed airMAX mode for both kinds of clients
- Dimensions: approx. 358 × 271.95 × 272.5 mm ( ≈ 14.09 × 10.71 × 10.73 in)
- Weight: Without mount: ~ 800 g (1.76 lb), With mounting hardware: ~ 980 g (2.16 lb)
- Power / PoE: Uses Passive PoE, 24 V, 0.3 A (Gigabit PoE adapter included with single-pack), Max power consumption: ~7 W, Supported voltage range: 24 V ± 10% (i.e. 22 – 26 V)
- Networking Interface: Single Gigabit Ethernet (10/100/1000) RJ45 port, which carries both data and power (PoE)
SKU: n/a -
Switches & PoE Injectors, Ubiquiti
Ubiquiti EdgeSwitch 8-Port 250W
Specifications
- Ports: 8 Gigabit RJ45 Ports, 2 SFP Ports, 1 Serial Console Port
- Non-Blocking Throughput: 10 Gbps
- Switching Capacity: 20 Gbps
- Forwarding Rate: 14.88 Mpps
- Ethernet speed: 8x 10/100/1000Mbps RJ45 Ethernet Ports, 2x 1Gbps SFP Ethernet Ports networking Interfaces
- Max Power Consumption: 150W
- Supports: POE+ IEEE 802.3at/af and 24V Passive PoE
- Mount: Wall mountable with Mount Brackets (Included), Desktop-Mountable (Do not physically stack the ES–8-150W.), DC Input Option (Redundant or Stand-Alone)
- Dimensions: 204 x 43 x 235 mm, 1.8 kg weight
- POE: POE+ IEEE 802.3af/at (Pins 1,2+, 3, 6-), 24VDC Passive PoE (Pins 4,5+,7,8-) PoE Interfaces
SKU: n/a -
Access Points, Ubiquiti
Ubiquiti UniFi UAP-AC-M-PRO Outdoor 802.11ac Mesh Pro
Specifications
- Concurrent Clients: 200+’
- Weight: 633 g (1.40 lbs)
- Networking Interface: (2) 10/100/1000 Ethernet Ports, Reset buttons
- Power Method: 802.3af PoE (Supported Voltage Range: 44 to 57 VDC)
- Power supply: 48V, 0.5A PoE Gigabit Adapter (Included)
- Consumption: 9 W maximum power consumption
- Maximum TX Power: 2.4 GHz: 22 dBm, 5 GHz: 22 dBm
- Antennas: (3) Internal Dual-Band Antennas, 8 dBi
- Stds: 802.11a/b/g/n/ac Wi-Fi standards
- Wireless Securities: Like WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- BSSID: Up to Four per Radio
- Mounting: Wall/Pole (Pole Kit Included)
- Supported data rates are Mbps: 802.11ac: 6.5 to 1300 Mbps (MCS0 – MCS9 NSS1/2/3/, VHT 20/40/80), 802.11n: 6.5 to 450 Mbps (MCS0 – MCS23, HT 20/40), 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps, 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps, 802.11b: 1, 2, 5.5, 11 Mbps
- Dimensions: 343.2 x 181.2 x 60.2 mm (13.51 x 7.13 x 2.37 “)
- VLAN: 802.1Q, Per-User Rate Limiting for advanced QoS, Supports Guest Traffic Isolation
- WMM: Voice, Video, Best Effort, and Background
SKU: n/a
